Oki C5750 User Manual page 34

S
YSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you
prefer to work.
ITEMS
POWER SAVE
DELAY TIME
PERSONALITY
PARA
PS-PROTOCOL
USB PS
PROTOCOL
NET PS
PROTOCOL
CLRABLE
WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
WAIT TIMEOUT
LOW TONER
SETTINGS
5 MIN
15 MIN
30 MIN
60 MIN
240 MIN
AUTO
PCL
IBM PPR III XL
EPSON FX
PS3
EMULATION
RAW
ASCII
RAW
ASCII
RAW
ASCII
ONLINE
JOB
ON
OFF
OFF
30
60
5~40~300,
OFF
CONTINUE
STOP
Menu functions > 34
EXPLANATION
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a low
level required to just keep the printer
operating and ready to receive data.
When a job is sent the printer will
require a warm-up time of up to 1
minute before printing can begin.
This item selects which industry
standard emulation your printer should
use. When set to AUTO, incoming data
is examined and the correct emulation
is automatically selected each time a
print job is received.
Selects PostScript data format for the
parallel port.
Selects PostScript data format for USB
port.
Selects PostScript data format for
network port.
When ONLINE, non-critical warnings,
such as requests for a different paper
size, can be cleared by pressing the ON
LINE button. When set to JOB, they
are cleared when the print job resumes.
Determines whether or not the printer
will automatically recover from a
memory overflow condition.
Specifies how many seconds the printer
will wait for paper to be fed before
cancelling the job.
Specifies how many seconds the printer
will wait when received data pauses
before forcing a page eject. In
PostScript Emulation mode the job will
be cancelled if timeout occurs.
Specifies whether the printer should
continue printing even after a low toner
condition is detected.