Panasonic Lumix DMC-FX78 Basic Owner's Manual page 189

The card is not recognized by the PC. (The built-in memory is recognized.)
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
The card is not recognized by the PC. (SDXC memory card is used)
Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
A message prompting to format the card may be displayed when connecting, but do not
format.
If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
There is a problem trying to upload to YouTube or Facebook.
Confirm that the login information (login ID/user name/mail address/password) is correct.
Confirm that the PC is connected to the Internet.
Confirm that resident software such as virus protection software or firewall is not blocking
access to YouTube or Facebook.
Confirm with YouTube or Facebook as well.
The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer which does not support PictBridge.
Set to [PictBridge(PTP)] in [USB Mode]. (P42,
The ends of the pictures are cut at printing.
When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
When you order photo studios to print pictures, ask the photo studio if the pictures can be
printed with both ends.
An unreadable language was selected by mistake.
Touch [ ], select the [Setup] menu icon [
language. (P45)
A red lamp sometimes turns on when the shutter button is pressed halfway.
•
In dark places, the AF Assist Lamp
The AF Assist Lamp does not turn on.
•
Is [AF Assist Lamp] on the [Rec] Mode menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
Others
131)
Others
]. Then select [~] to set the desired
(P88) lights red to make it easier to focus on a subject.
(P88)
- 153 -