Panasonic Lumix DMC-FX78 Basic Owner's Manual page 164

Acquiring of still pictures and [Motion JPEG] motion pictures
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
Align the marks, and insert.
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional). If the remaining battery power becomes low while the camera and the PC are
communicating, the alarm beeps.
"
Refer to Disconnecting the USB connection cable safely
USB connection cable. Otherwise, data may be destroyed.
Connect the camera to a PC via the USB connection cable
(supplied).
•
Do not use any other USB connection cables except the supplied one. Use of
cables other than the supplied USB connection cable may cause malfunction.
Touch [PC].
•
If [USB Mode]
automatically connected to the PC without displaying the [USB Mode] selection screen.
•
When the camera has been connected to the PC with [USB Mode] set to
[PictBridge(PTP)], a message may appear on the PC's screen. Select [Cancel] to close
the screen, and disconnect the camera from the PC. Then set [USB Mode] to [PC]
again.
Operate the PC.
•
You can save the images into the PC by drag and drop the image or the folder with the
image you would like to transfer onto the different folder in the PC.
Connecting to other equipment
(other than [AVCHD] motion pictures)
(P42) is set to [PC] in the [Setup] menu in advance, the camera will be
- 128 -
"
(P130) before disconnecting the