Philips PFL7 Series User Manual page 36


[Amplifier]: Stream audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If [EasyLink autostart]
was selected, the TV prompts the
connected device to switch to system
audio mode.
Synchronize audio
If your TV is connected to a home theater
and there is a lag between the picture and
the sound, you can synchronize them.

If you are using a Philips home theater,
the audio and video are automatically
synchronized.

For other home theater brands, you
need to switch on the audio sync delay
on the TV to synchronize the audio and
video.
Switch on Audio Out Delay
1. Press .
2. Select [Setup] > [TV settings] > [Sound].
3. Select [Audio out delay] > [On], then
press OK.
If your TV is connected to a home theater
and there is a lag between the picture and
the sound, you can synchronize them.

If you are using a Philips home theater,
the audio and video are automatically
synchronized.

For other home theater brands, you
need to switch on the audio sync delay
on the TV to synchronize the audio and
video.
Switch on audio sync delay
1. Press .
2. Select [Setup] > [TV settings] > [Sound].
3. Select [Advanced] > [Audio out delay] >
[On], then press OK.
EN 36
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.
Switch on Pixel Plus Link
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Pixel Plus Link] > [On], then press
OK.
Maximize video display
Some subtitles create a separate subtitle bar
under the video that limits the video display
area. To maximize the video display area,
you can switch on auto subtitle shift. The
subtitles then display over the video image.
Switch on auto subtitle shift
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink] > [Auto subtitle
shift].
3. Select [On], then press OK to activate.
Note: Make sure that the picture format of
the TV is set to [Auto format] or [Movie
expand 16:9].
Hear another device while TV is in
standby
You can hear a connected HDMI-CEC
compliant device through the TV speakers,
even while the TV is in standby.
OPTIONS to receive audio from
1. Press
the connected Philips EasyLink device.
If available, audio only mode is switched on.
2. Accept the prompt on the TV to turn off
the TV screen.
3. Control the audio playback with the TV
remote control.