Watch 3D - Philips PFL7 Series User Manual

Set TV guide
Before you use the TV guide, check these
settings:
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [TV guide] .
3. Select [From network] then press OK.
Access the TV guide
1. Press .
2. Select [TV guide], then press OK.
Note: If you are viewing the TV guide for
the first time, follow the onscreen
instructions to update the guide.
Use TV guide options
You can use the TV guide to:

Remind you when programs start

Search TV programs by genre
1. In the TV guide, press
2. Select an option, then press OK:

[Identify channel]: Manually update
channel information.

[Select day]: Select the day to display.

[Show remote control]: Display
onscreen remote control.

[Reload page]: Refresh the page display.

[Zoom page]: Change zoom level of
page display.

[Security info]: Display program
security information.

[Subtitles]: Enable or disable subtitles
when available.

Watch 3D

What you need
This section is only for PFL6xx7 and
PFL7xx7 series.
Your TV is a 3D TV. Before you watch 3D,
read the health warning information in Get
started > Important information > 3D
Health warning.
To watch 3D on this TV, you need the
Philips 3D Easy passive glasses (PTA417).
To experience the best 3D effect while you
watch 3D programs:
OPTIONS.

Watch the TV away from direct
sunlight.

Sit at a height where the center of the
TV screen is at your eye level.

Sit at a distance that is at least three
times the width (w) of the TV screen.
Do not sit more than 6m away.
Notes:

Purchase more 3D glasses - PTA417
from your local dealer. If you wear 3D
glasses that are not recommended by
Philips, the 3D effect may be reduced
or lost.

Some 3D formats are not supported.
Watch content
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI
connector.
2. Press , then select the 3D Blu-ray disc
player.
For 3D TV programs:
Select [Watch TV] and switch to a TV
channel that broadcasts 3D content.
Switch on 3D
The first time the TV detects a broadcast 3D
signal, an on-screen message prompts you to
choose your preference.

If you want the TV to switch to 3D
automatically, select [Switch to 3D].
EN 17