Use Ptt Vibrate; Transmit On The Priority Channel; End A Ptt Call; Change The Ptt Volume - Polycom SpectraLink 8020 User Manual

Use PTT Vibrate

Transmit on the Priority Channel

End a PTT Call

Change the PTT Volume

Answer a Telephone Call during a PTT Transmission

Start a Telephone Call during a PTT Transmission

1725-36165-001-E.doc
Using the Advanced Features of Your SpectraLink 8020/8030 Wireless Telephone
To enhance the alerting of a PTT call,
the menu.
Config
When is enabled, the handset will vibrate three times
PTT Vibrate
whenever a PTT broadcast is received, whether the handset is in
standby or in a call. If in a call, the chirp alert will also sound. The
vibration does not replace any PTT tone volume already set. To set
the handset for PTT vibrate only, enable
volume to zero.
is disabled by default.
PTT Vibrate
Press and release the
TALK
list. Press and hold
TALK
priority over all other calls in progress.
Press the key to exit the PTT call.
END
Press the up/down volume buttons on the side of the handset while
transmitting or receiving a PTT call.
Press the key. PTT transmissions will be pre-empted by the
START
telephone call.
Press the key and dial the number. PTT transmissions will be
START
pre-empted by the telephone call.
PTT Vibrate
PTT Vibrate
button. Select the priority channel from the
, then speak. The priority channel takes
may be enabled on
and set the tone
55