Adjust The Click Volume; Factory Reset; Hi-Hat Control - Millenium HD-100 Owner's Manual

Adjust the click volume

In click time signature choice mode, press the
VOLUME button to enter click volume adjusting mode.
The volume indicator lights up and the 3-digit LED
displays the current click volume value. Its volume
value can be adjusted by pressing the +/– buttons
(0-16 not in cycle).
Return to click time signature choice mode
In click volume adjusting mode, press the CLICK
button to exit the volume adjusting mode and to return
to the click time signature choice mode.

Factory reset

If you keep both + and – buttons pressed at the same
time when turning on the drum module, it will be reset
to the factory default settings. The following data will
be replaced by the factory data:
All users kits (include voice, volume setting).
Q
All recorded data.
Q

Hi-Hat control

Open hi-hat: Strike the hi-hat without stepping the pedal.
Q
Closed hi-hat: Strike the hi-hat with the pedal stepped.
Q
Foot closed: Completely step down the pedal.
Q
Splash: play the hi-hat with the pedal fully stepped and then instantly
Q
releasing it.
16
HD-100