Select A Pattern; Listen To The Pattern; Adjust The Pattern Volume - Millenium HD-100 Owner's Manual

Select a pattern

The unit offers 41 built-in patterns (40 preset patterns
and one user pattern).
Press the PATTERN button to enter pattern choice
mode, the 3-digit LED displays the current pattern
number and the pattern indicator lights up.
Press the +/– buttons to choose the current pattern
number (1-41, in cycle).

Listen to the pattern

Press the START/STOP button to start/stop pattern
playing. In process of pattern playing, the click
indicator flashes, which shows the beat of the playing
pattern. Additionally the pad indicators light up in
accompany with the variable trigger sound in process
of pattern play, for easy learning and practicing. If
another pattern is selected in current song playing, it
will start to play at the next measure.
In pattern playing mode, press START/STOP button to
stop pattern play.
Note:
The pattern and the MIDI IN use the same 16 midi
channels. When you use MIDI IN to play a song, it
might affect the built-in pattern playing. So you must
reset the drum module.

Adjust the pattern volume

In pattern choice mode, press the VOLUME button to
enter pattern volume adjusting mode. The 3-digit LED
displays the accompaniment volume value of current
pattern (please note that the percussion part volume
can not be adjusted, it just can be muted on/off by
using DRUM OFF button). The volume indicator lights
up, press the +/– buttons to adjust the pattern volume
value (0-16, not in cycle). Then press the PATTERN
button again to enter pattern choice mode.
Please note that in recording waiting mode, the
pattern volume value could be shown on the display
but it could not be adjusted.
Note:
Pattern volume only controls the accompaniment part
volume of the pattern.
12
HD-100