Getting Started; Unpacking The Watch; Turning On The Watch (First-Time Use Only); Batteries - Oregon Scientific SE121 User Manual

GETTING STARTED

UNPACKING THE WATCH

When you unpack your VIBRA-TRAINER / VIBRA-TRAINER PRO fitness
watch, make sure to keep all the packing materials in a safe place, in
case you need to later transport or return the product for servicing.
In the box, you will find:
Watch

TURNING ON THE WATCH (First-time use only)

Press any button to activate the LCD Display.

BATTERIES

The VIBRA-TRAINER / VIBRA-TRAINER PRO uses two CR2032 lithium
batteries – one for the receiver watch and another for the heart rate
chest belt. Both are already installed.
When the watch battery is running low, the low battery indicator
vibration alert will not work when the battery is too low.
When the heart rate chest belt battery is exhausted, it stops transmitting signals to
the receiver watch.
The batteries typically last one year. We highly recommend that you contact
the retailer or our customer service department if you need to replace them.
Instructions follow.
To replace the watch battery:
1. Turn the watch over so that you are looking at the back plate.
2. Using a small screwdriver, remove the four screws that hold the
back plate into position (Figure 1).
SE121/132_Eng
Heart rate chest belt 2x CR2032
lithium batteries
(already installed)
BATTERY
CR2032
3
Page 4
User manual
User Manual
displays. The
VIBRO will display.
3/19/03, 11:29 AM
Adobe PageMaker 6.5C/PPC