Grizzly G8146Z Owner's Manual page 22

9. Model G8146Z only:
a. Press the Emergency Stop button to stop
the machine.
b. WITHOUT resetting the switch, press
the Start button. The machine should not
start.
—If the machine does not start, the
Emergency Stop button safety feature
is working correctly.
—If the machine does start (with the
stop button pushed in), immediately
disconnect power to the machine. The
Emergency Stop button safety feature
is not working correctly. This safety
feature must work properly before pro-
ceeding with regular operations. Call
Tech Support for help.
-20-
c. Reset the Emergency Stop button by
twisting it clockwise until it pops out.
d. Turn the Power Switch key to the OFF
position—the Power Lamp should go
out.
e. Press the Start button.
—If the machine does not start, the
Power Switch safety feature is working
correctly.
—If the machine does start with the
Power Switch key turned to the OFF
position, immediately disconnect power
to the machine. The Power Switch
safety feature is not working correctly.
This safety feature must work properly
before proceeding with regular opera-
tions. Call Tech Support for help.
G8144Z/G8145Z/G8146Z
Vertical Metal Cutting Bandsaw