Materials And Allergies; Jabra Pro Base; Product Disposal - Jabra 9450 User Manual

10.5 MATERIALS AND ALLERGIES

The headband attachment is made of stainless steel and does not have a nickel-coated surface. Nickel release
from the headband is 0.02 μg/cm2/week, which is below the 0.50 μg/cm2/week limit established by EU Directive
94/27/EF. The stainless steel alloy was tested for nickel release in accordance with the European standard EN
1811:1998.
Other wearing-style attachments are made of plastic and contain no known allergens. The ear cushions do not
contain vinyl. The products contain no nickel, chrome or natural rubber that can come into contact with users'
skin.

10.6 JABRA PRO BASE

The Jabra PRO 9450 base meets the following specifications.
Dimensions:
160mm x 94mm x 82mm.
Wireless Standard:
(CAT - iq) European DECT and U.S. DECT.
DECT Range:
For European DECT; up to 150 meters from Jabra PRO base to headset.
For US DECT 6.0; up to 135 meters from Jabra PRO base to headset.
Operating Environment:
-10˚C to +55˚C (0˚C to +40˚C when charging); Up to 95% RH non condensing.
Keypad Functions:
Call handling, partial system configuration.
Recharge Cradle:
Fits supplied Jabra PRO headset; features magnetic coupling; easily replaced to accommodate future headset
upgrades.
Audio:
Built-in speaker provides ring tones and/or audio feedback for keypad operation.
Audio Bandwidth:
Narrowband or wideband.
Desk Phone Connections:
RJ-11 for handset, RJ-11 for phone body (or headset port), RJ-45 for AUX (for electronic hookswitch or Jabra
GN1000 handset lifter).
Clear Dial Tone Switch and Microphone Volume Switch:
Electromechnical switches. Clear dial tone switch set manually using Interactive Setup Wizard. Microphone
volume level determined and set automatically by Interactive Setup Wizard.
Electronic-hookswitch Standards:
Jabra GN1000, Jabra IQ EHS, Cisco, DHSG and MSH. Each requires additional cabling and/or equipment available
separately; more may become available in future and added via firmware upgrade. Jabra GN1000 is supported by
default and requires no additional configuration.
Busy Light Indicator:
2.5mm jack connector (available as an accessory).
PC Connector:
Micro USB.
Firmware Update:
Downloadable from PC.
PC-based Configuration:
All settings can be stored and loaded from a PC for backup and mass deployment.
Softphone Support:
Full call handling for Skype, Microsoft Office Communicator and Cisco IP Communicator; for other softphones see
headset as a standard sound card; support for additional softphones may be added via driver updates for the PC.
For the latest updates, see jabra.com/pcsuite on the web.
Theft Protection:
Kensington Security Slot standard.

10.7 PRODUCT DISPOSAL

Please dispose of the headset according to local regulations and recycle when possible. Do not dispose as
household waste. Do not dispose of the headset in a fire as the battery may explode. Batteries may also explode
if damaged.
JABRA PRO 9450
35