KTM 50 SX 2012 Owner's Manual page 73

Hide thumbs Also See for 50 SX 2012:

Table of Contents

SERVICE WORK ON THE ENGINE

–

Remove gear oil level check screw

S00005-10

–

Remove screw cap

–

Add gear oil until it flows out of the bore of the gear oil level screw.

Gear oil (ATF Dexron 3) (

–

Mount and tighten the gear oil level check screw.

Guideline

Screw, gear oil level check

–

Mount and tighten screw cap

S00007-11

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result

in unconsciousness and/or death.

–

Start the engine and check that it is oil-tight.

. Stand the vehicle upright.

p. 81)

When running the engine, always make sure there is sufficient ventila-

tion, and do not start or run the engine in an enclosed space without an

effective exhaust extraction system.

6 Nm (4.4 lbf ft)

Table of Contents