Table of Contents
Advertisement
foreword
We are proud to offer the Model g0664 heavy
duty Metal Cutting Bandsaw w/rollers. this
machine is part of a growing grizzly family of fine
metalworking machinery. When used according
to the guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable operation
and proof of grizzly's commitment to customer
satisfaction.
the specifications, drawings, and photographs
illustrated in this manual represent the Model
g0664 when the manual was prepared. however,
owing to grizzly's policy of continuous improve-
ment, changes may be made at any time with no
obligation on the part of grizzly. For your conve-
nience, we always keep current grizzly manuals
available on our website at www.grizzly.com.
any updates to your machine will be reflected
in these manuals as soon as they are complete.
Visit our site often to check for the latest updates
to this manual!
Contact Info
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: techsupport@grizzly.com
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
/
technical documentation Manager
C
o
p.o. Box 2069
Bellingham, Wa 98227-2069
email: manuals@grizzly.com
-4-
INTRODUCTION
functional Overview
a horizontal metal cutting bandsaw is used to
make straight cuts in metal workpieces.
the Model g0664 heavy duty Metal Cutting
Bandsaw with rollers features a 2
hydraulic upfeed and downfeed, a vise with
hydraulic clamping, two blade speeds, variable
speed downfeed, cutting angles from -45˚ to 60˚,
a blade coolant system, infeed and outfeed roller
tables, and laser light cut alignment.
to make cuts, the operator first adjusts the blade
to the desired cutting angle, then raises the blade
and opens the vise. a workpiece is placed onto
the table and the vise is manually closed to within
⁄
" of the workpiece. the vise close button is
1
4
pressed to hydraulically clamp the workpiece into
the vise. if needed for the operation, the blade
coolant pump is started and the blade is turned
on. the blade is hydraulically lowered into the
workpiece by pressing the blade down button.
the feed speed is adjusted with the feed speed
knob on the control panel.
When the cut is complete, the blade automati-
cally stops and returns to the top of its travel. the
workpiece is released from the vise by pressing
the vise open button.
long workpieces can be supported by the infeed
and outfeed roller tables.
g0664 heavy duty Metal-Cutting Bandsaw
⁄
hp motor,
1
2
Advertisement
Table of Contents
