Coolant Catch Tray; Blade Guide Position - Grizzly G0664 Owner's Manual

Coolant Catch Tray

use the coolant catch tray to reduce cutting fluid
lost at the end of a workpiece or when cutting at
steep angles. the catch tray fits over the lip of the
base as illustrated in figure 27.
Catch tray
figure 27. Catch tray installation.
g0664 heavy duty Metal-Cutting Bandsaw

Blade Guide position

the blade guide supports the blade during opera-
tion and the attached blade guard protects the
operator from the exposed portion of the blade.
therefore, proper positioning is important for
accurate and safe operations.
To position the blade guide:
1. place the workpiece in the vise and clamp it
in position.
2.
lower the saw bow until the blade is just
above the workpiece.
3.
disConneCt BandsaW FroM poWer!
Blade guide lock lever
figure 28. Blade guide and lock lever.
4. loosen the blade guide lock lever,
5.
slide the blade guide as close to the workpiece
as possible, making sure the blade guide will
not contact the workpiece during operation.
6.
tighten the blade guide lock lever.
upper Blade guide
-27-