Table of Contents
Advertisement
Internet Setting
LAN
IP Address: Enter the preferred IP address. Default is 192.168.1.1.
Subnet Mask: Enter the preferred subnet mask. Default is 255.255.255.0.
LAN2: This function enables the creation of multiple virtual IP interfaces for this device. It helps
to connect two or more local networks to the ISP or remote node. In this case, an internal device
is not required. Default setting is Disable. If you want to active IP Alias function, please select
Enable.
LAN2 IP Address: Specify an IP address for this virtual interface.
LAN2 Subnet Mask: Specify a subnet mask for this virtual interface.
DHCP Type: You can disable or enable the function with DHCP server. The default type is
Disable. The configuration of each item is described in DHCP Server section.
UPNP: UPnP offers peer-to-peer network connectivity for PCs and other network devices, along
with the feature to control data transfer between devices. Default is Disable.
♣ Enable: Select to activate the device's UPnP function.
♣ Disable: Select to inactivate the device's UPnP function.
Click Apply to save the changes or Cancel to recover the default setting.
48
Advertisement
Table of Contents
