Changing The Stand - Daewoo L710SC User Manual

CHANGING THE ST AND
CHANGING THE ST AND
Removing Original Stand
Turn off the monitor and pull out the power cable.
Place a cushion or a soft cloth on the floor and put the product on it with
the front of the monitor facing the floor.
1
1. Detach the rear cover of the stand with a screwdriver.
2. Remove the four screws connecting the stand and the body and the
stand is disassembled.
English - 16
2
2
ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION)
Support
stand
This monitor's installation surface is compatible with various kinds
of VESA standard stands.
Hole spacing : 100x100 mm
Screw Length : 8~12 mm
English - 17
Surface for
stand
installation
Tighten up screws at the locations
indicated by arrows.