Operation - VuQube V10 Installation And Operating Manual

Vu Qube V10 Operation
• IMPORTANT! CLEAR LINE OF SIGHT for Vu Qube Antenna to the
SOUTHERN SKY REQUIRED. Physical obstruction (i.e., smoke
stacks, buildings, trees, telephone poles, etc.) can block the satellite
signal from reaching the antenna.
• Satellite TV and receiver technology are constantly changing.
If you experience difficulty contact (866) 802-2228.
Finding the Satellite and Acquiring a Signal
NOTE: Satellite Receiver and TV MUST be ON
1. Determine Dish Elevation
Options: Enter Zip Code in System Set-up on receiver
Use Quick Reference Maps to estimate Elevation
2. Position Antenna to proper
Elevation using Up/Down arrows
on Vu Qube Remote.
3. Go to the signal meter screen on TV.
Choose transponder number:
Dish Network #11
DirecTV #19
4. Rotate Antenna using Left/Right
arrows on Vu Qube remote until
signal appears on Signal Meter
screen.
NOTE: Antenna is pointed directly at
coaxial cable connector and toward
vehicle when rotating line is straight up.
5. Fine tune and maximize signal using
all 4 arrows.
Vu Qube
-or-
10
37°
37°
This number indicates Elevation
This number indicates Elevation
37°
37°
Line moves to indicate
Rotating Antenna
Line moves to indicate
Rotating Antenna
37°
Antenna is pointed toward
vehicle when line is
straight up.
V10-6/1007