Installation - VuQube V10 Installation And Operating Manual

Installation

Overview of Installation
• The Vu Qube is designed to be mounted to a vehicle (Figure 1).
• Install with coaxial cable connector facing side of vehicle you will run
coaxial cable.
• It is recommended to install the Vu Qube with a minimum of 4" of the top
cover above the highest point of the cab or air shield (Figure 1) and away
from interfering objects like smoke stacks.
• The coaxial cable needs to enter the Cab to be connected to the satellite
receiver.
Figure 1. It is recommended to have a minimum of 4" of the VuQube above the highest point on
the cab, including the air shield. It is also recommended to be as far away as possible from any
object that may obstruct direct line of sight of the antenna to the southern sky. Such interfering
items may include air-conditioner units, logistic devices and brackets, beacons and smoke stacks.
Figure 2. Face connections for wiring towards the back of the cab.
Vu Qube
Be sure to mount with
minimum 4" above cab
Coaxial Cable Connection
• Face towards back of the cab.
• Position connector on side
you will run coaxial cable.
Back of cab
6
Mounting Location
• Choose mounting
position with least
amount of obstruction
(i.e. away from smoke
stack).
• Make sure to have
space to run coaxial
cable.
• Make sure when you
run the wires that
there are not any
sharp bends.
V10-6/1007