AUTO RUN MODE
Selecting this mode, the projector runs all 14 programs in a continuous
loop and it is possible to set up the frequency by pressing UP and
DOWN buttons.
DMX MODE
It is possible to control the device by a DMX controller.
ADDRESSING
To set the address of the projector, push SETUP button until the display
shows:
DMX MODE
Dmx address:
Now it is possible to assign the wanted channel to the projector by
pushing UP or DOWN buttons.
DMX PROTOCOL
The PLLEDAB8 blinder allows you to set 5 or 8, 14 or 26 DMX channels
for different applications.
Push SETUP button until display is as follows:
DMX MODE
Channel num: 26
16