Dmx Channel Values (12 Channels Mode) - PROEL PLLEDMLW18 User Manual

Slave Mode
Up-to 32 units can be daisy chained together with one single unit acting as Master and all other
linked units as Slaves. Slave units will all run in synch with the master unit without the need for an
additional controller. Connections can be made using standard DMX control cables with Master
unit running in Auto Run or Sound Activated Modes an placed at the start of the chain.
To select, use the "MODE/ESC" button and choose "SLAu". When the "ENTER" button is pressed
the LED display changes to "Son" and the unit will be slaved to control signals coming from a
Master unit
Service Modes
After major configuration changes it may be necessary to reboot or reset the unit.
Resetting the Unit
To select, use the "MODE/ESC" button and choose "rEST"(restore). Press "ENTER" to confirm.
The unit powers itself down and then on again for a few seconds. During this time the LED
display will scroll "rEST" from left to right, after which normal operation recommences.
Restoring factory defaults
To select, use the "MODE/ESC" button and choose "LoAD"(load). Press "ENTER" to confirm. The
LED display will change to "d001" to confirm a factory reset has been completed
Powering the unit initially
During the warm up the unit will auto test itself for a few seconds. During this time the led display
will scroll "rEST" from left to right .The unit then commences operation normally

4.3 DMX channel values (12 channels mode)

Channel Value
1
0-255
2
0-255
3
0-255
4
0-255
5
0-255
0-7
6
8-134
135-239
240-255
7
0-255
8
0-255
9
0-255
0-7
8-21
22-34
35-49
50-63
64-77
78-91
10
92-105
106-119
120-134
135-147
148-161
162-175
176-189
190-203
PAN
PAN FINE
TILT
TILT FINE
PAN/TILT SPEED
From Fast to Slow
DIMMER & STROBE
Blank
Dimmer
Strobe from 0Hz to 40Hz
Open
RED
GREEN
BLUE
COLOR
Blank
White
Red
Dark Green
Dark Blue
Light Blue
Magenta
Yellow
Purple
Orange
Light Green
Pink
Brown
Gold
Crimson
16
Function