Replacing The Fuse - Radio Shack 21-1576 Owner's Manual

21-1576_rsj_012604.fm Page 14 Monday, January 26, 2004 11:39 AM
14
3. Set to
NB/OFF/MON MON.
monitoring a CB channel over a PA system.
4. Rotate the knob on the front of the radio or press
on the microphone to change the channel.
UP/DN

REPLACING THE FUSE

The CB's in-line fuse protects it from power surges and
short circuits. When replacement is required, use a 2-amp,
fast-acting glass fuse, available at your local RadioShack.
1. Make sure your vehicle and CB are turned off.
2. Push the fuse holder ends together. Then, turn either
end counterclockwise and pull them apart.
Fuse Holders
3. Remove the old fuse and insert a new fuse of the same
type and rating.
4. Push the fuse holder ends together and twist one end
clockwise.
This indicates you are
Fuse