Real Time Clock; Touch Screen; Microsd/Sdhc Card - Toshiba Libretto W100 User Manual

Real Time Clock

Problem
The following message
is Displayed on the
screen:
RTC Power
Failure.
Press Home Button
and set the
date/time in OS.

Touch screen

Apparent computer's touch screen problems may be related to the
computer's setup and configuration - please refer to Chapter 6,
for further information.
Problem
No display
Markings appear on the
computer's touch
screen.
Problems above remain
unresolved or other
problems occur

MicroSD/SDHC Card

For further information, please refer to Chapter 3,
Options.
User's Manual
Procedure
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and
time in the Date and Time screen of Windows.
To access it, tap Start -> Control Panel ->
Clock, Language and Region -> Date and
Time.
Procedure
Adjust the display priority, and to make sure it is
not set for output to an external monitor.
You should try to remove the marks by gently
wiping the touch screen with a clean dry cloth or,
if this fails, with a good quality LCD screen
cleaner. In this latter instance you should always
follow the instructions with the screen cleaner
and always ensure you let the screen dry
properly before closing it.
You should initially refer to the documentation
supplied with you software to determine if it is
this that is causing the problems. Alternatively
you may wish to run the TOSHIBA PC
Diagnostic Tool to check the general operation
of the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Troubleshooting
HW Setup,
Hardware, Utilities and
7-6