User Password - Toshiba Libretto W100 User Manual

General
This window displays the BIOS/EC version, BIOS language and contains
two buttons : Default and About.
BIOS Language
Default
About
Setup
This field displays the installed BIOS version, date, and EC version.
Password
This option allows you to set or reset the user password for power on.

User Password

Let you register a new password or change/remove an existing password.
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
Enter a password of up to 10 characters. Valid characters for the password
are 1 through 9 (numeric characters). The character string you enter is
displayed as a string of asterisk.
2. Tap OK. The following message appears, allowing you to verify the
password.
3. If character strings match, the password is registered. Tap OK. If they
do not match, the following message appears. You must repeat from
step 1.
To delete a user password:
1. Select Not Registered to display the following prompt:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
3. Tap OK. If the character string you enter matches the registered
password, the password option is reset and the display changes to:
User's Manual
Select the language to use for BIOS settings.
Return all HW Setup values to the factory
settings.
Display the HW Setup version.
Changes or remove the password. (Default)
Selects the password. A dialogue box will appear
to allow you to set the password.
Enter Password:
Verify Password:
Entry Error!!!
Enter Password:
Not registered
HW Setup
6-2