Registering Your Account with SwannSmart
To access your ADS-450 via the Internet, you'll need to setup a SwannSmart account.
•
Accounts are easy to setup, and it
only takes a moment.
•
You can create an account during
the Local WIFI Configuration step,
or you can do it via the SwannSmart
website.
Register an Account during Local WIFI
Configuration
•
You'll automatically be taken to the
Connect to SwannSmart interface
once you've connected the camera
to the Internet.
•
If you've already registered with
SwannSmart, choose Use Existing.
•
If you need to make a new account,
enter a Username, Password (and
Confirm) and a valid Email address.
Then choose Continue.
•
Note that you can only log into one device at a time.
Register an Account with SwannSmart via the Website
•
Open a web browser and enter
•
On the SwannSmart website, click the button labelled "Register".
•
Enter your username and a valid email address, then choose a password and
confirm it.
If anything goes wrong with your account, or if you forget your password,
10
www.swannsmart.com
Ensure that you use a valid email address:
this is how we'll verify that you're really you.
in the address bar.