Specifications; Input/Output; Output Signals - Hitachi HV-C20 Operation Manual

Specifications

(1) Color format
(2) Optical system
(3) Imaging system
(4) Imaging device
No. of total pixels
No. of effective pixels
Sensing area
(5) Sync system
(6) Horizontal resolution
(7) Signal-to-noise ratio
(8) Standard sensitivity
(9) Minimum illumination
(10) Gamma
(11) Preset color temperatures
(12) Vertical contour correction
(13) Lens mount
(14) Selectable gain
(15) Electronic shutter
Preset mode:
Lock scan mode:
AES mode:
Long time integration:
(16) Color bars
(17) Power supply
(18) Power consumption
(19) Ambient temp.
(20) Dimensions
(21) Mass
*1 Flange focal distance = 17.526mm

Input/output

(1) Input
Genlock signal
Serial data input

(2) Output signals

Composite video signal
Y/C signals
RGB signals
Sync signal
Serial data
NTSC/PAL
1/2 , f1.6 prism Optics
RGB, 3 CCD s
1/2" CCD
NTSC: 811(H) X 508(V) PAL: 795(H) X 596(V)
NTSC: 768(H) X 494(V) PAL: 752(H) X 508(V)
7.95(H) x 6.45(V)mm
Internal or genlock (automatic switching)
700 TVL (Y, at center) 680 TVL (RGB)
NTSC: 60dB typ. PAL: 58dB typ.
(Gamma:1, DTL:OFF, gain:0dB)
2000 lx, f8
5.5 Ix
0.45 or 1.0
3200K and 5600K
1H
C-mount
0 to 18dB (in 1dB steps or AGC)
1/100(1/120 PAL), 1/250, 1/500, 1/1,000, 1/2,000,
1/4,000, 1/10,000s
1/60.38(1/50.31 PAL) to 1/10,168s (1/10,040 PAL)
OFF to 1/10,000s (in 1H steps until 4 lens stops)
NTSC:1/30 to 1s (30 steps) PAL:1/25 to 1s (25 steps)
Full bars
12V DC (10.5 to 17V)
4.5W approx.
Operation: -1 0 to 45 C Storage: -2Q to 60 C
65(W) X 65(H) X 130(0)mm
600g approx.
*2 A memory is required to obtain images continuously.
VBS:1.0Vp-p + 3dB or black burst/75
or high (sync: 0.3± 0.1Vp-p, burst:0.3± 0.1Vp-p)
1.5Vp-p/high, 4-pin
VBS; 1.0Vp-p/75ohm, BNC
Y: 1.0Vp-p/75 ohm
C: 0.286Vp-p (burst) 75 ohm
S: connector
R: 0.7Vp-p/75 ohm / G: 0.7Vp-p/75 ohm / B: 0.7Vp-p/75ohm
D-sub
HD: 2Vp-p/75Q VD: 2Vp-p/75Q D-sub
1.5Vp-p/low, 4-pin