Id/Title; Id: Setting Of Id No. Display Position; Setting Of Title Display Position - Hitachi HV-C20 Operation Manual

9. ID/TITLE

ID: Setting of ID No. display position

When ID number is registered to each camera, the desired camera can be remotely controlled
from the a PC.
The data on the next line is executed.
This ID number can be displayed on the screen.
OFF :
TOP : Displayed at the top right
BOTTOM : Displayed at the bottom right
TITLE: Setting of title display position.
The data on the next line is executed
OFF :
TOP : Displayed at the top left
BOTTOM : Displayed at the bottom left
DATA: ID number data
Three characters consisting of uppercase letters, figures and/or spaces.
TITEL data
12 characters consisting of uppercase letters, figures, symbols and/or spaces.
Note: "-"'(space symbol)on data display position is not displayed on the screen.
RETURN: The ADJUST screen is displayed. Setting procedure of ID/TITLE
1. Move the cursor to DATA.
2. Press the UP or DOWN switch, then the characters are displayed at the lower part of the screen.
3. Move the blinking cursor to the desired blinking character by the UP or DOWN switch, and enter
it by the SEL switch. Functions of soft keys displayed above the character screen.
EXIT: Enter the DATA setting mode.
: Moves a blinking character in the DATA section leftward by one character, when
changing the input data.
: Moves a blinking character in the l3ATA section rightward by one character, when
changing the input data.
BS : Backspace SP: Space The following characters and symbols can be used.
SP : Space
The following characters and symbols can be used.
Note: The characters on the upper two lines can be used for the ID data.
0 l 2 3 4 5 6 7 8 9 A B C D E F G H
I J K L M N O P Q R S T U V W X Y Z
A b c d e f g h i j k l m n o p q r
s t u v w x y z ? < > + - * / . , ; :
TITLE
TITLE
ID
ID