Hv-C20/20M Name And Function Of Each Section - Hitachi HV-C20 Operation Manual

HV-C20/20M Name and function of each section

Lens Connector
Pilot lamp
VIDEO connector
A composite video signal (1Vp-p
/75 ohm) is available.
REMOTE connector
connect the remote control box
RC-C10 or the RS-232C level
converter
12V IN connector
Y/C connector
Y/C signals are available
MULTI connector
The RGB signals, sync signal, etc, are
available.
A trigger signal is connected in the external
shutter mode.
Tapped Camera Mount hole
Tapped Camera Mount hole
Flange focal distance adjustment ring
BAR/SEL switch
Direct mode: Operate as the ON/OFF switch
of the color bar signals.
MENU mode: Operate as a cursor shift
key to select each function.
MENU switch
Switches between the direct mode and the
MENU mode.
When the MENU mode is selected,
the menu is displayed.
ASC/DOWN switch
Direct mode:
Operates as the ON switch of the auto
shading correction (ASC) function.
MENU mode:
Operates as the switch to change or
execute the data of each function.
AWB/UP switch
Direct mode:
Operates as the ON switch
white balance (AWB) function.
MENU mode:
GL IN connector
Connect a black burst signal or a composite
video signal to operate the camera in the
genlock mode.