Carton Inventory
Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model
Multi-Function Door
Control Panel
SECURITY✚
Keyless Entry
Model 3280M-267
ONLY
Safety Reversing
Sensor Bracket (2)
INSTALLATION HARDWARE
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Lock Washer 5/16" (4)
Screw 6-32x1" (2)
®
SECURITY✚
3-Button Remote Control
Models 3280M (1)
3280-267 (2)
Motor Unit with 2 Light Lenses
®
Trolley
Belt Pulley Bracket
The Protector System
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving
Eye) with 2-Conductor White &
White/Black Bell Wire attached
purchased. If anything is missing, carefully check the
packing material. Parts may be stuck in the foam.
Hardware for installation is also listed below.
Remote Control
Transmitter Visor Clip
One-Piece Rail
2-Conductor Bell Wire
White & White/Red
®
Insulated Staples (30)
Drywall Anchors (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Rope
Handle
5
Styrofoam
Belt
Door Bracket
Header Bracket
Curved Door
Arm Section
Safety Labels
and Literature
Belt Cap Retainer
Straight Door
Arm Section