Hunter 47132 Owner's Manual page 16

5. Use the
for the period and press
adjust the end time on the right of the screen for this scheduled period.
Press
Next
6. Set the temperature for your heating cycle as indicated by the flashing
heat to arrow on your screen. Use the
temperature and press
indicated by the flashing the cool to arrow. Set this temperature with
your or
7. The thermostat will start this process again for "Asleep". Repeat steps
1-5 to schedule the time and set the temperature for your sleep period.
When finished press
8. When setting "At Home", you will only be asked to set a temperature.
The thermostat calculates your "At Home" time by what remains
unscheduled from your "Away" and "Asleep" periods. Set your "Heat
To" temperature first and press
press
Next
9. If you are scheduling the day periods in order (Weekdays then
Weekends), the screen will flash "Updated!"and take you to the
weekend period.
10. When you have completed all scheduling, press
11. If you skipped a section, or are only programming the weekend, the
Thermostat will show "Updated!" and return you to the Home screen.
16
Setting Your Schedule
or buttons to adjust the start time on the left of the screen
again.
Next
buttons and press
to get to "At Home".
Next
to finish Scheduling.
. Again you will use the
Next
. You will be asked to set your cooling cycle,
.
Next
, then Set your "Cool To" temp and
Next
44116-01 • 08/06/2012
or
and buttons to change the
to finish.
Done/
Home
buttons to