Topfield TF4000Fe User Manual page 41

4.5 Installation
Motorized DiSEqC 1.3
Satellite Name
Satellite Angle
My Longitude
My Latitude
Select Enable or Disable. If you are using DiSEqC 1.3 switch,
set to Enable.
Select a satellite that will be used to identify a motor system.
It is the longitude of the selected satellite and it can be set au-
tomatically in case of selecting a satellite name. You can use
numeric keys of RCU to enter the angle. East or West will be
£ £
selected by ¢ ¡ , ¢
V−
It means the longitude of your location. You can select the
angle, East and West by
It means the latitude of your location. You can select the angle,
South or North by
¡ button.
V+
£ £
¢ ¡ , ¢ ¡ or numeric button.
V− V+
£ £
, or numeric button.
¢ ¡ ¢ ¡
V− V+
35