Topfield TF4000Fe User Manual page 29

4.2 System Setting
TV Type
Video Output
TV Aspect Ratio
Display Format
Sound Mode
RF Output
RF Channel
Select your TV standard. For automatic PAL/NTSC selection,
set it to Multi.
Select the mode of Video output among RGB, S-Video, YUV
and CVBS on TV SCART by using
Select your TV screen format. Select 4:3 or 16:9 mode by using
£ £
, buttons.
¢ ¡ ¢ ¡
V− V+
If you have a TV set with the 4:3 picture format and transmis-
sion is in 16:9, you can select the display format. Select the
Letter Box or Center extract by using
It allows you to configure the sound mode. Select the Stereo,
Mono, Left and Right mode by using
Sound mode is configurable later on by using the sound but-
ton on your remote controller.
When the STB is connected to the TV by an RF cable, you may
need to select the correct TV standard system. Select the PAL
G, PAL I, PAL K, NTSC M mode by using
Select a RF channel by using
channel is CH36. When you change the RF channel number,
you must also change to the same value on the TV. If you do
not, there will be no picture and sound.
£ £
¢ ¡ , ¢ ¡ buttons.
V− V+
£ £
,
¢ ¡ ¢
V− V+
£ £
¢ ¡ , ¢
V− V+
£
,
¢ ¡
V−
£ £
, buttons. The default RF
¢ ¡ ¢ ¡
V− V+
23
buttons.
¡
¡ buttons. The
£
buttons.
¢ ¡
V+