Download Print this page

Operating Modes; Temperature Setpoint - Aube Technologies TH115 Owner's Manual

Programmable
Hide thumbs Also See for TH115:

Advertisement

GFCI Test (GA & GB power baseonly)
The GFCI monitors the electrical flow for
any loss of current; if there is one, the
thermostat will cut off power to the heating
system. We recommend you test the GFCI
immediately after installing the control
module, and once a month thereafter to
ensure it is operating properly. To test:
Increase the temperature
heating indicator
Press TEST:
• Successful: the TEST warning light is ON and
power to heating system is cut off.
• Unsucessful: the TEST warning light is OFF. Cut
power to heating system from the main power
panel and call customer service.
When successful, reset thermostat (Stand By/On) to
power the heating system.
NOTE:
If the test warning light comes ON during normal
operation, cut power to heating system from the main
power panel and have an electrician verify the installation.

Temperature Setpoint

The following temperature setpoints are pre-programmed:
Symbol
Description
Comfort (
when at home
Economy (
when asleep/
away from home
Vacation (
during
prolonged absence
To modify a setpoint:
Set the desired temperature using
Press and Hold the
button until symbol is displayed.
Press RET to exit.
until the
is displayed.
Default
A/AF
F
)
70°F
82°F
64°F
68°F
)
50°F
50°F
)
.
or
or

Operating Modes

Automatic —
Press MODE until
rent program number is displayed.
You can temporary bypass the current pro-
gram by setting a specific temperature
by pressing on a pre-defined setpoint button (
The new setpoint will be maintained until the begin-
ning of the next program.
Manual
—Maintains a constant temperature.
Press MODE until
Set temperature
pre-defined setpoint.
Vacation
—Maintains the Vacation setpoint
during a prolonged absence.
Press
until the icon is displayed.
Pre-programed Schedule
The TH115 programmable thermostat is pre-programmed
with the following schedule:
New
F
Time you
wake up and
desired
temperature
Programs
Executes the schedule.
is displayed. The cur-
is displayed.
or press (
F
Time you
Time you
leave and
return home
temperature
and desired
during your
temperature
absence
MO
TU
WE
TH
6:00
6:00
6:00
6:00
8:30
8:30
8:30
8:30
16:00 16:00 16:00 16:00 16:00 --:--
23:00 23:00 23:00 23:00 23:00 23:00 23:00
F
or
) .
F
) to use
F
F
F
Time you go
to bed and
overnight
temperature
FR
SA
SU
6:00
6:00
6:00
8:30
--:--
--:--
--:--

Advertisement

loading

This manual is also suitable for:

Th115-fTh115-120ga