Canon MX720 Series Online Manual page 182

After selecting the layout and press the OK button, you can select whether you use the preview
screen. If you select ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set
the print quality to Standard, then try copying again. If the problem is not resolved, set the print
quality to Fast and try copying again.
This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy eight original pages on one sheet of paper.
In this case, four original pages are copied on each side of paper.
If you use this function in combination, select the two-sided copy setting for ADF duplex scan
and 2-sidedPrintSetting and the stapling side of print paper on the Print settings screen.
For details on two-sided copy function:
Two-Sided Copying
When Loading the Original on the platen glass:
• Before scanning:
When the preview function is activated, the machine starts pre-scanning before scanning the
original. When pre-scanning is finished, the screen below (preview screen) is displayed on the
LCD.
1. Rotate
If you press the right Function button, the original rotates by 180 degrees.
2. Rescan
If you press the left Function button, the original is rescanned.
Press the OK button to start scanning.
• After scanning:
Placing documents (platen) screen appears on the LCD after scanning each sheet of original.