Troubleshooting - Altec Lansing iMW725 User Manual

Symptom Possible Problem
AC adapter isn't plugged into a wall outlet or the
connector isn't plugged into the power supply jack on
the back of the speaker.
Wall outlet is not functioning.
Speaker system
doesn't respond
The lithium-ion battery is drained.
(no power)
The power isn't turned on.
Your portable audio device's software is too old.
Portable audio
Portable audio device is locked up.
device doesn't
respond to the
speaker or remote
Your Bluetooth-enabled portable audio device doesn't
respond to the , and other functions.
Solution
Plug the AC adapter into a wall outlet and plug the connector into the power
supply jack on the back of the speaker.
Plug another device into the same outlet to determine if the outlet is working.
Make sure the shipping and long-term storage switch is in the "ON" position
and recharge the battery by plugging the AC adapter into a wall outlet and
the connector into the power supply jack on the back of the speaker.
Turn on the speaker system by pressing the
lights up.
Upgrade software on your portable audio device by visiting the
manufacturer's Web site.
Please make sure your Bluetooth-enabled portable audio device is working
properly before pairing it with the inMotion Air speaker. Refer to your
manufacturer's manual for details.
Your portable audio device is not compatible with the inMotion Air control
functions.

Troubleshooting

button. The "Power" LED
13