Table of Contents
Advertisement
8
Servicing Your System
SERVICE SCHEDULE
When properly maintained, your Aqua-Cleer
years of dependable service. Use the following as a guide to get the most out of your
system. Service frequency may vary depending on your local water conditions. High
sediment, chlorine, turbidity, or hardness levels may require more frequent service.
Refer to Figures 3 & 4.
At Least Once Per Year
Replace:
• Particle Filter (1)
• Activated Carbon Filter (2)
• Polishing Filter (4)
Check:
• RO Membrane Filter (3)
- TDS Reduction Performance
- Flow Rates
• Capillary Assembly
Sanitize the System.
Use the convenient chart inside the back cover of this booklet to keep track of your
system's maintenance.
FILTER REPLACEMENT
Culligan recommends that you have your Aqua-Cleer Good Water Machine serviced by
your local Culligan Man. You can rely on his or her experience and expertise to keep
your system in top operating condition.
If you wish to service your system, the filters are available from your Culligan dealer.
For replacement components, please contact your local Culligan Dealer or
1-847-205-6000 for the dealer near you. See the Parts List at the end of this section for
replacement numbers.
Cartridge Conditioning
The activated carbon, reverse osmosis, and polishing filter cartridges must be
conditioned as follows prior to installation into the Good Water Machine. Your
Culligan Man can do these important procedures at the time of purchase.
Activated Carbon Cartridge - 2 gallon flush to remove carbon dust
RO Membrane Filter - minimum 6 hour flush to remove preservative solution
Polishing Filter - 2 gallon flush to remove carbon dust.
Good Water Machine
®
™
will give you
Advertisement
Table of Contents
