Culligan Gold Series Owner's Manual page 16

16
16. Total Capacity Set Point (Max Capacity) - This setting is
used to program a value that corresponds to the maximum
capacity that can be expected from a unit before it is com-
pletely exhausted. If the unit reaches this set point an
immediate regeneration will occur even if the control is set
to delay mode. This setting will only appear if a flow
meter is connected to the circuit board and the 'dEFLtS' set
to 'NO'. Adjust the value with the "+" or "-" keys. The dis-
play will show the "REGEN" icon and "MAXCAP" for two
seconds and then display the "REGEN" and "GALLONS"
icons and the setting numbers to adjust.
Pressing the "Status" key will save the setting and move to
the next programming step.
17. Additional Features - The Culligan Gold Series Softener electronics are packed with features that
expand the water softening experience. The statistics button allows you to view four separate gages:
Capacity Remaining, Water Used Today, Average Water Usage, and Current Flow Rate. To view
each item, press the statistics button, to step to the next item, press the button again. These screens
will time-out after 5 seconds if no button is pushed.
Programming Mode Timeout
If no key activity occurs for a period of 180 seconds (3 minutes) while in programming mode, the mode
will time out, exit the programming mode and return to time of day display. Any setting that wasn't
saved by pressing the 'status' key prior to the control timing out will revert back to the original value.
REGEN
MAXC AP
REGEN
9999 99
GALLONS