Security Settings - American Megatrends MI801 User Manual

Security Settings

This setting comes with two options set the system password. Supervisor
Password sets a password that will be used to protect the system and
Setup utility. User Password sets a password that will be used exclusively
on the system. To specify a password, highlight the type you want and
press <Enter>. The Enter Password: message prompts on the screen.
Type the password and press <Enter>. The system confirms your
password by asking you to type it again. After setting a password, the
screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted
to enter the password. A message will confirm the password to be
disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
Main Advanced
Security Settings
Supervisor Password: Not Installed
User Password: Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
BIOS SETUP UTILITY
PCIPnP Boot
[Disabled]
MI801 User's Manual
BIOS SETUP
Security
Chipset
Install or Change the
Password.
<- Select Screen
↑↓
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Exit
33