Power Button Mode; Apm Configuration; Resume On Ring; Resume On Rtc Alarm - American Megatrends MI801 User Manual

BIOS SETUP
Advanced

APM Configuration

Power Management/APM

Power Button Mode

Resume On Ring

Resume On PME#

Resume On RTC Alarm

Power Management/APM
By default, this field is set to Enabled.
Power Button Mode
Go into On/Off, or Suspend when power button is pressed.
Resume on Ring
This option is used to enable activity on the RI (ring in) modem line to
wake up the system from a suspend or standby state. That is, the system
will be awakened by an incoming call on a modem.
Resume on PME#
This option is used enable activity on the PCI PME (power management
event) controller to wake up the system from a suspend or standby state
Resume On RTC Alarm
This option is used to specify the time the system should be awakened
from a suspended state
28
BIOS SETUP UTILITY
[Enabled]
[On/Off]
Disabled
Disabled
Disabled
MI801 User's Manual
Enable or disable
APM.
<- Select Screen
↑↓
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit