Using Speaker Stands; Stacking The Db300 - Samson dB300 Owner's Manual

Setting Up Your dB300 System

Using Speaker Stands

The dB300 enclosure features a standard 1 3/8", pole
mount receptacle, which are compatible with speaker
stands from a variety of manufacturers. Before installing
the dB300 on a speaker stand, loosen the thumbscrew
located on the bottom of the rear side of the enclosure.
Once installed on the stand, be sure to tighten the
thumbscrew to hold the speaker in place. Be careful not
to over tighten the thumbscrew to avoid stripping the
threads.

Stacking the dB300

The dB300 enclosure incorporates gender mating stack
feet and bumpers that allows you to stack one dB300
on top of another. When stacking the dB300's, be cer-
tain that the rubber feet from the top unit are securely
fastened into the bottom unit's stacking bumpers.
NOTE:
DO NOT STACK dB300's OVER TWO (2) TALL.
8