Setting Up Your Db500A System; Using Speaker Stands; Stacking The Db500A - Samson dB500a Owner's Manual

Setting Up Your dB500a System

Using Speaker Stands

The dB500a enclosure features a standard 1 3/8", pole
mount receptacle, which is compatible with speaker
stands from a variety of manufacturers. Before installing
the dB500a on a speaker stand, loosen the thumbscrew
located on the bottom of the rear side of the enclosure.
Once installed on the stand, be sure to tighten the
thumbscrew to hold the speaker in place. Be careful not
to over tighten the thumbscrew to avoid stripping the
threads.

Stacking the dB500a

The dB500a enclosure incorporates gender mating
stack feet and bumpers that allows you to stack one
dB500a on top of another. When stacking the dB500a's,
be certain that the rubber feet from the top unit are
securely fastened into the bottom unit's stacking bum-
pers.
NOTE:
DO NOT STACK dB500a's OVER TWO (2) TALL.
11