OVEN TEMPERATURE SENSOR
Oven Temperature
Sensor
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
2-Wire
Sensor Connector
Test Procedure
Refer to page 4-18 for the location of the oven
temperature sensor and the procedure for ser-
vicing it.
To test the oven temperature sensor, perform
the following steps:
1.
Use an ohmmeter and set the range switch
to R x 10.
2.
With no power applied, touch the leads of
the ohmmeter to the connector pins of the
sensor (you do not have to separate the
connectors). Depending upon the oven
temperature, you should obtain the corre-
sponding reading:
Temperature (˚F)
32 ± 1.9
75 ± 2.5
250 ± 4.4
350 ± 5.4
450 ± 6.9
550 ± 8.2
650 ± 8.6
800 ± 13.6
If the reading is not within the range shown, the
sensor is defective and should be replaced.
5-7
Ω
Resistance (
)
1000 ± 4.0
1091 ± 5.3
1453 ± 8.9
1654 ± 10.8
1853 ± 13.5
2047 ± 15.8
2237 ± 18.5
2667 ± 24.4