Oven Temperature Calibration - Whirlpool 4322525 Manual

OVEN TEMPERATURE CALIBRATION

1. Press and hold the BAKE keypad for five
(5) seconds. The current offset, if any, will
be shown in the 3-digit display. CAL is
shown in the 4-digit display (3 digits on
right).
Pressing the TEMP keypad s up arrow
2.
adjusts the temperature in 10˚F incre-
ments in the following sequence: 0˚, 10˚,
20˚, 30˚, -30˚, –20˚, –10˚, 0˚, and so on.
3. Press the START/ENTER keypad to acti-
vate the desired temperature adjustment.
If the START/ENTER keypad is not
pressed within 5 minutes, the adjustment
is ignored.
NOTE: The BAKE temperature adjustment can-
not result in operating temperatures higher than
525˚F, or lower than 170˚F, as measured at
oven cavity center. Once the BAKE tempera-
ture has been adjusted, BROIL temperatures
are automatically offset to the same degree.
The CLEAN temperature is also offset auto-
matically when the BAKE temperature is ad-
justed. If the BAKE temperature has been
raised, the CLEAN temperature is offset by
+5˚F. If the BAKE temperature has been low-
ered, the CLEAN temperature is offset to
–5˚F.
6-4