Parental Block (V-Chip) - Maxent 58" Owner's Manual

TV Functions

Parental Block (V-Chip)

V-Chip (Parental Guide) function is to prevent children from watching programs that are not suitable such as
violent or adult content. The user must enter a PASSCODE before any of the V-Chip restrictions are set up or
changed.
Enabling V-Chip
V-Chip is initially shipped from the factory set to OFF. To enable V-Chip, please follow the steps below.
Press to access the OSD menu. Use
EN
keys to select SETUP then press
58
to enter SETUP menu.
Use
BLOCK from SETUP options and press
to enter PARENTAL BLOCK settings.
A window will now prompt the user to enter a
PASSCODE using the remote control. If the
default system PASSCODE has not been changed,
enter 0000 (this is the initial default from factory).
As each numeric digit is entered, a small "X" fills
each slot. If the code entered is incorrect, an
"Error" status is displayed. Simply re-enter the
passcode again.
Notes:
When entering the 4-digit passcode, please
enter the digits slowly. The TV will display "X"
in each of the number slots as it receives the
passcode.
If the wrong passcode is entered three times,
the TV will go back to the SETUP menu.
58
keys to select PARENTAL
or
PASS CODE ENTER
ENTER CODE
ENTER NEW CODE
X
ENTER CODE
PASS CODE ENTER
ENTER CODE
PARENTAL
BLOCK
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT