Maxent 58" Owner's Manual page 31

BRIGHTNESS
Adjust brightness to enhance the level of dark areas in the picture such as night scenes and
shadow scenes. Increasing brightness will make dark areas more visible.
COLOR
Use color to adjust the color saturation of the picture. Increasing color will make the color more
intense. Reducing color setting will make the color less intense.
TINT
Use tint to adjust the color of fleshtones. Increase in the right direction will shift the picture with
more green in appearance. Decreasing setting in left direction will shift the picture with more red
in appearance.
SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the picture. Increasing the setting will
enhance the edges of objects in the picture. Decreasing the setting will reduce enhancement.
BLACK LEVEL EXTENSION
To enhance luminance and color transition. There are 2 settings to choose from: (1) ON, (2) OFF.
NOISE REDUCTION
To improve the quality of the picture in the case of poor reception.
FORMAT
Use to change various screen width modes. There are 2 modes to choose from: (1) 16:9, (2) 4:3.
Please see details on page 27.
V-SIZE
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical
direction. Decrease to reduce the picture size in the vertical direction.
V-POSITION
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift
the picture down.
H-SIZE
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal
direction. Decrease to reduce the picture size in the horizontal direction.
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease
to shift the picture to the left.
CLOCK PHASE
Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under
RGB mode.
Notes:
H-Position, H-Size, V-Position and V-Size adjustments are only available in PC, DVI, and Component input
modes.
Picture Controls
T4:3, (3) ma.
EN
31
31