External Audio Connections - Maxent 58" Owner's Manual

Display Connections
Connecting a Set-Top Box
Using TV Input
Connect the 15-pin D-Sub RGB connector from
the back of the HDTV Set-Top Box to the PC-IN
Connector located on the back of the TV.
Connect the red (R) and white (L) audio-out
EN
jacks from the HDTV Set-Top Box to the R and
18
L audio-in jacks located next to the PC-IN
Connector.
Notes:
Some HDTV Set-Top Boxes may not have a PC output. Use Component Video input or HDMI input
method if this is the case.
Upon connecting your HDTV Set-Top Box to the PC input of the TV, it may be necessary to adjust
various picture settings on the TV to correctly match the output of the HDTV Set-Top Box. This is
caused by the different video timings set by various HDTV Set-Top Box manufacturers.

External Audio Connections

Connecting to External Amplifiers
This TV can be connected to an external
amplifier using the AUDIO OUT jacks located on
the back of the TV.
Connect the red (R) and white (L) AUDIO OUT
jacks from right side of the connector panel to
the external amplifier.
Note:
The AUDIO OUT RCA jacks can be set to
either Fixed or Variable audio output levels.
18