Replacing The License Plate Light Bulb; Troubleshooting - Yamaha Majesty YP400Y Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Place the scooter on the center-
1 stand.
2. Remove cowling
page 7-8.)
2
3. Remove the license plate light cov-
er and license plate light lens by
3
removing the screws.
4
5
6
7
1. License plate light lens
8
2. License plate light cover
3. Screw
9
4. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU34273
B. (See
1. Bulb
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
1
wise until it stops.
2
6. Install the license plate light lens
and license plate light cover by in-
stalling the screws.
7. Install the cowling.
3

Troubleshooting

1
Although Yamaha scooters receive a
thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your scooter re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the scooter prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look like
Yamaha parts, but they are often inferi-
or, have a shorter service life and can
lead to expensive repair bills.
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
7-37
WARNING
EAU25881
EWA15141