Operation And Important Riding Points; Starting The Engine - Yamaha Majesty YP400Y Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
1
understand, ask your Yamaha dealer.
2
WARNING
Failure to familiarize yourself with
3
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
4
5
6
7
8
9
EAU15951
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. To start the engine after a
EWA10271
turnover, be sure to turn the main
switch to "OFF" and then to "ON". Fail-
ing to do so will prevent the engine from
starting even though the engine will
crank when pushing the start switch.
EAU45310

Starting the engine

NOTICE
See page 6-3 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 4-17 for more information.
1. Turn the key to "ON" and make
2. Close the throttle completely.
3. Start the engine by pushing the
6-1
sure that the engine stop switch is
set to " ".
start switch while applying the front
or rear brake. NOTICE: For maxi-
mum engine life, never acceler-
ate hard when the engine is
cold!
[ECA11041]
If the engine does not start, release
the start switch, wait a few sec-
onds, and then try again. Each
starting attempt should be as short
as possible to preserve the battery.
Do not crank the engine more than
10 seconds on any one attempt.
EAU34461
ECA10250