PSB Owner's Manual page 4

1. Remove the Aluminium Bracket assembly from the speaker by removing two
plastic Knobs.
Please refer to Figure
2. Hold the bracket assembly against the intended mounting surface, ensuring that
such location allows for full adjustment range of the speaker orientation without
interfering with close-by objects. Using the Plastic Wall Plate of the Aluminium
Bracket as your template, mark screw hole locations.
3. Take the Aluminium Bracket and Plastic Wall Plate, as an assembly, and install to
the mounting surface with the appropriate hardware.
4. Secure the speaker to the mounted bracket assembly with the two Knobs.
Figure 1:
Port Plug
(if applicable)
Figure 2:
CAUtION: When using the Cable Guide ensure the Steel Cable wraps around the
Aluminium Bracket.
1.
Grille
Knob
Aluminium Bracket
Secured to mounting surface
Cable Guide
4
Aluminium Bracket
Cable Guide
Steel Cable
Plastic Wall Plate
Set Screws