Turn And Lane-Change Signals; Headlamp High/Low-Beam Changer - Pontiac Vibe 2007 Owner's Manual

Turn and Lane-Change Signals

The turn signal has an upward (for right) and a
downward (for left) position. These positions allow
you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
To signal a lane change, raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return
by itself when you release it.
If you signal a turn or a lane change and notice
the arrow flashing rapidly, a signal bulb may
be burned out and other drivers will not see your
turn signal.
140
An arrow on the
instrument panel cluster
will flash in the
direction of the turn or
lane change.
If a bulb is burned out, have it replaced to help
avoid an accident. If the arrows do not go on at all
when you signal a turn, check for burned-out
bulbs and then check the fuse. See Fuses and
Circuit Breakers on page 365.

Headlamp High/Low-Beam Changer

The headlamps must be on for this feature to
work. For high beams, push the turn signal lever
away from you.
It will go off when you switch to the low beams. To
switch back to low beams, pull the lever toward you.
When the high beams
are on, this light on the
instrument panel
cluster also will be on.