Pontiac Vibe 2007 Owner's Manual page 254

Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information
label is attached to the vehicle's center pillar
(B-pillar). With the driver's door open you will find
the label attached below the door lock post (striker).
The Tire and Loading Information label shows the
number of occupant seating positions (A), and the
maximum vehicle capacity weight (B) in kilograms
and pounds.
254
This weight includes the weight of all occupants,
cargo, and all nonfactory-installed options.
The Tire and Loading Information label also shows
the tire size of the original equipment tires (C), and
the recommended cold tire inflation pressures (D).
For more information on tires and inflation see Tires
on page 322 and Inflation - Tire Pressure on
page 329.
There is also important loading information on the
Certification label. It tells you the Gross Vehicle
Weight Rating (GVWR) and the Gross Axle Weight
Rating (GAWR) for the front and rear axle. See
"Certification Label" later in this section.
Steps for Determining Correct Load Limit
1. Locate the statement "The combined
weight of occupants and cargo should never
exceed XXX kg or XXX lbs" on your
vehicle's placard.
2. Determine the combined weight of the driver
and passengers that will be riding in your
vehicle.
3. Subtract the combined weight of the driver
and passengers from XXX kg or XXX lbs.